zone compliant solids control unit / drilling mud recycler

  • Length: 16.2 m
  • Width: 2.6 m
  • Height: 4.1 m
  • Weight: 26670 kg
  • Fuel Type: N/A
  • Capacity: 600 gpm


Zone Compliant

  • Designed to meet rigorous ANZ Ex and IECEx compliance requirements, the R600HC combines industry leading performance and safety credentials in a zone compliant package.
  • Key features include power units and electrical connections housed within lockable steel enclosures to prevent operation whilst in an active gas zone. International Paints Inter-zone 954 paint has been utilised for resistance to corrosive drilling fluids.

Twice the cleaning capacity of the competition

  • The combination of high horsepower pumps and massive screen area gives the R600HC an unprecedented cleaning capacity of 1200 gpm (28.57 bbl/m / 4,542 l/min) to support a 1000 gpm mud pump

Features to meet the needs of today’s job environment

  • All fluid inlet and outlet ports are below walkway level, reducing trip and access hazards;
  • The push-button control station that operates all machine functions, as well as the mix hopper, are located on the same single working level and covered by battery-backup work lights;
  • Integrated hydraulically operated secondary stairs deploy automatically to reduce manual handling; Individual weight of setup components lifted manually, such as handrails and walkways, are consistent with safe working practices. Stairway and walkways utilise an anti-slip tread;
  • All access points are covered by battery-backup work lights, and key components are housed in lockable compartments reduce the risk of vandalism.

Cleaning capabilities

Charge/Mix 60hp motor Discharge only,
29 bbl/m / 4,540 lpm / 1,218 gpm
Agitator System Three 4.4 hp (3.3 kW) stainless steel bladed motors
Cleaning Capacity Designed to support one 1000 gpm (31.7 bbl/m, 3785 lpm) mud pump
Tank layout 3 tanks; dirty, gray, and clean
Total fluid capacity ~200 bbl / 31,400 l / 8,400 gal
Clean/Mix Tank Capacity 74.48 bbl / 11,841 l / 3128 gal
Shale Shakers 4
First cut / Scalping shakers 1 x shaker for underflow of Desilter,
1 x shaker for underflow of Desander
Desander 75hp motor
2 x 10”cones
48.7 bbl/m / 5678 lpm / 1500 gpm
Desilter 50hp motor
12 x 5”cones
38.1 bbl/m / 4542.5 lpm / 1200 gpm

General dimensions and weights

  • Height: 13.5 ft / 4.1 m
  • Weight: 58,660 lbs / 26,670 kg
  • Length: 53 ft / 16.2 m
  • Width: 8.5 ft / 2.6 m


Type Triple-axle trailer
Suspension Air-ride
Axles 10-bolt, hub-piloted, ABS ready